Sold PRICE DROP: BFG9060 accelerator+CPU combos

  • Thread starter Thread starter CodePoet
  • Start date Start date
  • Replies Replies 65
  • Views Views 7626
Status
Not open for further replies.

CodePoet

Well-known member
AmiBayer
Rating - 100%
130   0   0
Joined
Jan 16, 2023
Posts
806
Country
USA
Region
WA
Price drop on BFG9060+rev6 060 to $625 shipped!

3x 2x 1x available BFG9060 - $750 $720 $700 $625USD, pre-tested in A3000T and/or AA3000+ and/or A4000 (you choose), WhichAmiga output available. (BFG's made by @DjCook ), with genuine Rev6 CPUs.

Shipping on the accelerator+CPU combos is included in USA, with insurance.

PXL_20240110_203341845.jpg
Inquire about heat-sink possibilities and/or additional testing as part of your PM, after declaring interest.

Update: individual CPUs are sold out! I have 5x 3x 2x rev6 68060 CPUs. The other 4 in this batch were validated as genuine rev6 via the accelerators listed later.

PXL_20240110_193138169.jpg

Each 68060 is $350 $340 $320USD, includes shipping in USA, payment via PayPal fnf. If somehow these are *not* rev6 as shown via WhichAmiga, then you will be refunded upon return of the chip (with no bent pins etc). There is extremely low risk, as these come from the same source as the following 4x CPUs, all of which *have* been tested to show as genuine Rev6.

The following accelerators pre-equipped with rev6 CPUs are also for sale:
- 1x TF1260 - $650 $620 $600USD, pre-tested in A1200, WhichAmiga output available. (TF1260 made by @alenppc )
(TF1260 sold)

Thank you!
Brian.

NOTE: these are also listed elsewhere, so quantities can change

Edit: Bump: Inventory updated and price on BFG9060+rev6 dropped
 

Attachments

  • PXL_20240110_193144059.MP.jpg
    PXL_20240110_193144059.MP.jpg
    457.6 KB · Views: 127
  • PXL_20240110_193153801.jpg
    PXL_20240110_193153801.jpg
    255.1 KB · Views: 100
  • PXL_20240110_193157141.jpg
    PXL_20240110_193157141.jpg
    211.9 KB · Views: 94
  • PXL_20240110_193203322.jpg
    PXL_20240110_193203322.jpg
    556.5 KB · Views: 89
  • PXL_20240110_193206687.jpg
    PXL_20240110_193206687.jpg
    538.9 KB · Views: 93
  • PXL_20240110_203348852.jpg
    PXL_20240110_203348852.jpg
    371.6 KB · Views: 90
  • PXL_20240110_203353883.jpg
    PXL_20240110_203353883.jpg
    342.4 KB · Views: 88
  • PXL_20240110_203407645.jpg
    PXL_20240110_203407645.jpg
    292 KB · Views: 92
  • PXL_20240110_203413438.jpg
    PXL_20240110_203413438.jpg
    188.2 KB · Views: 128
Last edited:
Declaring Interest 1x CPU
How much is shipping to Germany?
you have to press the actual declare-interest button, then feel free to PM me with full shipment details. I'm happy to work up a shipping quote, although it may be in the $30-40 range with insured delivery. It is often easier to source locally, but i'm happy to do the legwork

Edit: note: these are also listed elsewhere, so quantities can change
 
Hi.
I would like to declare interest but the button is missing on this thread, there is only "post reply" button.
Please could you quote shipping to France?
Why not test the untested ones on one of your board?
Thanks.
 
Oh no, not the dreaded sharpie!
While the markings makes it easy for the seller to not get back a different chip than was sent out, it isn't something I personally did. My original source did this to the chips :( I'll be trying a magic eraser later today to see if they can be removed.
Hi.
I would like to declare interest but the button his missing on this thread, there is only "post reply" button.
Please could you quote shipping to France?
Why not test the untested ones on one of your board?
Thanks.
It is time consuming to yank and insert every chip, while also risking bent pins. But if buyer insists on that, I'll do it case by case
 
Ok.
I think a staff member should look into why there is no declare interest button here.
I can't do anything appart from replying like Storm82 before me.

EDIT: ok i understand i need to declare interest by hand, i did it before, pending shipping cost please.
 
Ok.
I think a staff member should look into why there is no declare interest button here.
I can't do anything appart from replying like Storm82 before me.

Read the link in my previous post
 
Declaring interest.
I'm interested in one rev6 68060 CPU. Pending shipping quote to Germany.
(Marked as sold/completed by CodePoet)
 
Last edited by a moderator:
Will the BFG with CPU clock up to 100mhz stable?
Thank you.
I can apply heatsink+fan and test for ~2hrs at 100MHz, if you're a serious buyer. It will take some time before I can do that.

Edit: @davideo can we add @Xanxi to the interest queue? or is the button back for them, and they should press it?
 
I can apply heatsink+fan and test for ~2hrs at 100MHz, if you're a serious buyer. It will take some time before I can do that.

Edit: @davideo can we add @Xanxi to the interest queue? or is the button back for them, and they should press it?
The button is back now for members to declare interest
 
Hi. Sorry i have to withdraw interest as explained by PM. Thanks.
 
Status
Not open for further replies.
Back
Top Bottom