The BFG works with ZZ9000, and the Rev4 SDMAC may prevent booting from onboard SCSI. Apart from that, it should work, unless there is a problem with this particular BFG board or 060 CPU.
Sold PRICE DROP: BFG9060 accelerator+CPU combos
- Thread starter CodePoet
- Start date
- Replies 65
- Views 7626
- Status
Same BFGs (2x) worked perfectly in my aa3000+ with a4091, and in my a3000t with onboard SCSI. There is no problem with the cpus or bfg's.
Edit: and with zz9000, both machines buster11, dmac2/ramsey4
Edit: and with zz9000, both machines buster11, dmac2/ramsey4
Last edited:
Chucktastic
New member
Declaring interest.
(Marked as sold/completed by CodePoet)
(Marked as sold/completed by CodePoet)
Last edited by a moderator:
BFG and CPU are working in my A4000D under OS3.2. Haven't put these through any real tests but the usual show config applications all verify a Rev6 cpu and 128MB Z3 RAM. Positive feedback incoming. Fast shipping, Thanks Brian!
JHanna
Active member
Is that at 100MHz?
Not these particular units, as I didn't apply double-sided thermal tape and heatsink/fans to them. I don't run things at 100 without proper cooling. They were run at 50MHz to verify rev6 CPUs
- Status
Interest Queue
Similar threads
- Locked
