Project of Megachip for Amiga

[Tuxbar81]

Below, for answering to questions about the Megachip onto a CDTV motherboard. The installation is possible if the PCB is connected to a PGA84 socket.



Some informations:
- The AGNUS are on the way from Germany to France. Should arrive very soon.
- The RAM and GAL chips are normally arrived in Belgium, so... they should arrive soon.
- The Tatalum capacitors are ordered. I'm waiting for them.

I'm waiting for the AGNUS & RAM chips for the first batch.

Actually, 46 PCB reserved for the second batch. The batch will closed when 50 PCB will be reserved.

 

[Springycz]

If the A2000 is not available soon I'd like to express my interest in 2 pcs of kits of 500 version.

 

[dls987]

Declaring interest in 2 assembled Megachips with the Agnus if possible. Thanks!

 

[Tuxbar81]

I'm going to place the order for the production of 50 PCBs.
Generally, the factory produces 3 or 5 pièces more.
I place all interest over the limit of 50 pcbs into a new table for an eventual third batch.
The first members of this new table will perhaps have the chance to obtain a pcb from the previous batch.

- - - Updated - - -

For information, I have received the AGNUS chips ordered by some interested members. Pictures this evening if I find time!
I'm always waiting for the Ram & GAL chips, and tantalum capacitors.

 

[Pgovotsos]

Yay!! This will be so fantastic to have these! If you get these to work on all of the pre 3000 machines, I think you're going to have tremendous success. Maybe enough to get factory assembly? It's so great to see such wonderful support for the early Amigas.

 

[kgthomps]

Interested in 1 Assembled, need agnus (A500 v6 NTSC).
Agnus (2MB) 8375 390544-02 A500+ (NTSC), A600 (NTSC)


Edit: I have a 2MB Agnus I can send if you have an extra setup, Just let me know... Thanks again!

 

[Tuxbar81]

Sorry for my long silence. Lot of work like every year at this time...

I have received the AGNUS (30 pieces).
The GALs & RAMs are also arrived for 20 boards. When I'll begin to send the first kits, I'll order again for the thirty other reserved boards.
The tantalum capacitors are arrived.

I'm going to contact the members interested in the first batch.
The kits are almost ready. I have just to program the GAL.

Voilà!

- - - Updated - - -

Interested in 1 Assembled, need agnus (A500 v6 NTSC).
Agnus (2MB) 8375 390544-02 A500+ (NTSC), A600 (NTSC)


Edit: I have a 2MB Agnus I can send if you have an extra setup, Just let me know... Thanks again!

I have added a line for you for one assembled board.
For the AGNUS, the best way is to send me your chip. I'll solder it.

 

[Schuimpy]

Thx for the update, looking forward to it

 

[keith1]

Thx for the update, I can't wait!

 

[Acill]

Nice! Cant wait for the kits to be ready!

 

[Miru]

Very cool! Looking forward to it and my cdtv cant wait either

 

[Timtheloon]

Can I declare interest in another two Assembled for your third batch but so they fits the CDTV with a PGA84 socket and with the Angus if you have any left

also Tuxbar81 when would you like me to sent the angus out to you for my second batch order

 

[Tuxbar81]

Hi all!

After some hundreds kms, I'm back today from my summer holidays, and it's time for some news.

- - - Updated - - -

Can I declare interest in another two Assembled for your third batch but so they fits the CDTV with a PGA84 socket and with the Angus if you have any left

also Tuxbar81 when would you like me to sent the angus out to you for my second batch order

Yes, of course, I add a line for you into the table for the third batch.
For the Agnus chip, normally, all the ones I have bought are reserved. You'll have to provide it, except if I buy some new. I'll see...

- - - Updated - - -

piacc64, mattsoft, keith1, holzroller and Pgovotsos have reserved the Megachips from the first little batch.
As the picture below shows, the kits are ready.
I'll contact all of them tomorrow morning to ask for postal address & for payment.
I have to finalize the assembly of the Megachip of Pgovotsos. Should be done tomorrow.



- - - Updated - - -

Table of first batch updated for the dispatching. Stay tuned!

 

[Pgovotsos]

Yippee!

 

[optiguy]

Any time line on an A 2000 version?

Sent from my SM-G930P using Tapatalk

 

[Tuxbar81]

PM sent to piacc64, mattsoft, keith1, holzroller.

- - - Updated - - -

Any time line on an A 2000 version?

Sent from my SM-G930P using Tapatalk

A2000 design version is finalized. I'll post onto its thread when I'll have the PCBs in my hands.

 

[mattsoft]

Paid! Woo-hoo!

 

[Tuxbar81]

Paid! Woo-hoo!

Payment received ! Thanks a lot.
I'll send you the track number when the package will be posted.

 

[CrazyBob]

Interested in 1x DIY kit

 

[Tuxbar81]

Interested in 1x DIY kit

Added to the table.