For Sale PSU replacement enclosure for Amiga 3000D pre-order

[Titan.io]

I have no clue what I should be asking for. I need a complete PSU and enclosure. Do you sell those? I have an Amiga 3000 - US model.

 

[arymanx]

I have no clue what I should be asking for. I need a complete PSU and enclosure. Do you sell those? I have an Amiga 3000 - US model.

Hi , I may run another batch soon. Please be aware that I do not offer fully assembled units. This is DIY project. I may source for you additional parts like fans and 15pin connector but you will have to do wiring yourself or find someone who will do it for you.

 

[Titan.io]

Yes that’s fine. Whatever you can supply is fine. I will have it assembled here in Belgium. If you can recommend the psu model unit to use that I can buy? Also I read something about a ticker which is also needed? One last question, can the 110v psu in my Amiga 3000 be converted to 220v? Like an internal switch or bridge wire?

 

[arymanx]

Yes that’s fine. Whatever you can supply is fine. I will have it assembled here in Belgium. If you can recommend the psu model unit to use that I can buy? Also I read something about a ticker which is also needed? One last question, can the 110v psu in my Amiga 3000 be converted to 220v? Like an internal switch or bridge wire?

I can supply second hand PSU (FSP250-50GUF) as per description in sale thread. You will have to tell what TICK frequency you need (I suspect 60Hz once you ask about 110V PSU). Regarding conversion 110V to 220V I can not help you as I do not have enough knowledge.

 

[Titan.io]

I am located in Belgium hence why I need to replace the psu to 220v. So for the ticker I guess I would need 50hz. Yea please to 2nd hand psu if you have one. Let me know when I can purchase. Thanks

 

[Rakeim132]

Yes that’s fine. Whatever you can supply is fine. I will have it assembled here in Belgium. If you can recommend the psu model unit to use that I can buy? Also I read something about a ticker which is also needed? One last question, can the 110v psu in my Amiga 3000 be converted to 220v? Like an internal switch or bridge wire?

Yes and the modification for 110V to 220V is very simple on A3000D: just ONE wire to desolder.
Please have a look here:

A3000 Power Supply

 

[Titan.io]

Thank you very much for the info. Even though I will of course do the procedure, I am still interested to acquire a new modern psu with a quieter fan etc.

 

[MadMungo]

Declaring interest.

declaring interest (including the FSP-250-50GUF)
with the tick to be programmed for 50Hz please

---

(Marked as sold/completed by arymanx)

 

[BITbyBIT]

Declaring interest.
Please program Tick module to 60hz.

*Update* Declaring interest in *two* enclosure kits,
both with a FSP-250-50GUF (if you have them) and
both Tick modules programmed to 60hz.

(Both are for USA model A3000D systems)

Thank You.

---

(Interest marked as expired by arymanx)

 

[wowjesstfc]

Declaring interest.

---

Kit including the FSP250-50GUF psu, 60 Hz Tick signal with shipment to US.

---

(Marked as sold/completed by arymanx)

 

[Titan.io]

Interest withdrawn. (was previously declared here)

 

[MadMungo]

Declaring interest.

declaring interest (including the FSP-250-50GUF)
with the tick to be programmed for 50Hz please

Items received in good condition. feedback left

 

[jeff_hanna]

Declaring interest.

---

Declaring interest for enclosure and Motherboard power connector.

---

(Marked as sold/completed by arymanx)

 

[michol]

Declaring interest.

---

(Marked as sold/completed by arymanx)

 

[michol]

Oops!
Declaring interest for two enclosures, including fans and motherboard power connectors, both with the tick programmed for 50Hz and for one FSP-250-50GUF, please.

 

[arymanx]

@michol , I have enclosures in stock, but run out TICK PCBs- just ordered, but it will take around two weeks before I have it. Please send me PM.

@akuehnemund and @BITbyBIT are you still interested? If you changed mined please withdraw interest.

 

[jeff_hanna]

Declaring interest.

---

Declaring interest for enclosure and Motherboard power connector.

---

(Marked as sold/completed by arymanx)

Package received! That was fast. Thank you, @arymanx!

 

[michol]

Package received! Many thanks, @arymanx! Feedback left.

 

[Bit-Image]

Declaring interest

 

[Karl_Retro32]

Declaring interest.

A complete setup

---

(Marked as sold/completed by arymanx)