Hi all,
For sale is a WarpEngine 4040 with 40mhz 68040.
Memory is 64MB on two simm sockets.
The other two sockets work but a previous owner cut the plastic clips down so the board will fit in a 3000D. As such, 128mb will work but you’d have to use tie-wraps or bands to hold in place the second two simms. Recommend you fit new ram sockets if you want the full 128MB.
Scsi works great.
I have been using this in my AA3000+ successfully, it’s a superb accelerator. This particular machine has a hole cut in the drive bay for a cpu fan.
I have also used this WarpEngine in my 4000D - it works fine there too.
It fits in my AA3000+ only with low profile simms (not the ones for sale here which are slightly taller), so you must get shorter ram to fit this in a 3000D case, and even then the fit is very very tight. As such, I would recommend this for 4000D. Anyone wishing to buy this for a 3000D takes a risk that clearance in their machine might not be enough.
The price is £600 plus shipping.
First refusal for 24 hours goes to @rimmer who has an open Wanted thread. I have PM’d him already. After 24 hours it goes to Interested buyers.
For sale is a WarpEngine 4040 with 40mhz 68040.
Memory is 64MB on two simm sockets.
The other two sockets work but a previous owner cut the plastic clips down so the board will fit in a 3000D. As such, 128mb will work but you’d have to use tie-wraps or bands to hold in place the second two simms. Recommend you fit new ram sockets if you want the full 128MB.
Scsi works great.
I have been using this in my AA3000+ successfully, it’s a superb accelerator. This particular machine has a hole cut in the drive bay for a cpu fan.
I have also used this WarpEngine in my 4000D - it works fine there too.
It fits in my AA3000+ only with low profile simms (not the ones for sale here which are slightly taller), so you must get shorter ram to fit this in a 3000D case, and even then the fit is very very tight. As such, I would recommend this for 4000D. Anyone wishing to buy this for a 3000D takes a risk that clearance in their machine might not be enough.
The price is £600 plus shipping.
First refusal for 24 hours goes to @rimmer who has an open Wanted thread. I have PM’d him already. After 24 hours it goes to Interested buyers.