Sold Zorro IDE-CP-LAN card with custom brackets

[jdryyz]

Items received and working great! Left feedback.

 

[8 Bit Dreams]

Parcels sent to users @Xanxi, @Ntsimouris, @Neztik

No reaction from user @jkdsteve for now..

 

[jkdsteve]

Parcels sent to users @Xanxi, @Ntsimouris, @Neztik

No reaction from user @jkdsteve for now..

I'm on it, sorry was away quite a lot yesterday.

 

[8 Bit Dreams]

Payment from @jkdsteve was received,
Parcel sent, tracking number updated via PM
Also user @G-linx got tracking details

All network cards are sold now,
next batch is planned in March

 

[Ntsimouris]

Card received in perfect packaging and condition! Thanx!
What driver should i install for ide interface?
Can you provide a link to download?

 

[Boing-ball]

Card received in perfect packaging and condition! Thanx!
What driver should i install for ide interface?
Can you provide a link to download?

There isn’t a IDE driver. It uses its own in ROM form in the card. Either LIDE.device or if you move J1 you can use the Oktagon version which usually shows as 2nd.scsi.device. Both work as bootable. I’m using mine for a IDE Zip250. Note, it is not any quicker than the onboard A4000 IDE.

 

[8 Bit Dreams]

Card received in perfect packaging and condition! Thanx!
What driver should i install for ide interface?
Can you provide a link to download?

Glad to hear it arrived safely!
You don't have to install anything to get ide to work:

this card has its own BootROM (actually dual ROM: Oktapussy & LIDE), ROMs may be switched by JP1

just be aware LIDE ROM uses lide.device while Oktapussy uses scsi.device - this information need to be corrected in HDTOOLBOX/Information to be able to do drive partition, and also for setting up CD-ROM drive..
best regards,

DjCook

 

[Ntsimouris]

Glad to hear it arrived safely!
You don't have to install anything to get ide to work:

this card has its own BootROM (actually dual ROM: Oktapussy & LIDE), ROMs may be switched by JP1

just be aware LIDE ROM uses lide.device while Oktapussy uses scsi.device - this information need to be corrected in HDTOOLBOX/Information to be able to do drive partition, and also for setting up CD-ROM drive..
best regards,

DjCook

Wow thats 35 years old true plug and play from legendary Amiga! Thanx a lot!

 

[Ntsimouris]

Glad to hear it arrived safely!
You don't have to install anything to get ide to work:

this card has its own BootROM (actually dual ROM: Oktapussy & LIDE), ROMs may be switched by JP1

just be aware LIDE ROM uses lide.device while Oktapussy uses scsi.device - this information need to be corrected in HDTOOLBOX/Information to be able to do drive partition, and also for setting up CD-ROM drive..
best regards,

DjCook

so JP1 is for choosing bootrom for IDE. what about the other 2 jumpers?

 

[8 Bit Dreams]

Oh, functions are noted in English, sorry...
IDE_OFF can turn IDE OFF
AUTOBOOT can disable Autoboot

...wait a minute! We are actually talking English, are You trying to piss me off!?

 

[Ntsimouris]

OK, sorry (actualy JP1 hasnt any note on board, but you explained it to me previously).
I wonder, in an earlier PM you wrote: "You can force it to Zll mode - just close Zorroll jumper and use Z2 device".
Where is this jumper?

 

[8 Bit Dreams]

It was meant to Your non-working in Z3 Freeway card bought from Thorsten...

 

[Ntsimouris]

Aha, now its clear.
Thanx

 

[Ntsimouris]

Hi again.
I installed the card, everything is working great (IDE+LAN).
One minor question regarding setup.
I copied lan driver to devs/networks, installed roadshow.
As i couldnt find a suitable netinterface driver in Storage folder, i modified ariadne netinterface to use your driver.
This worked, using a manual ip/subnet configuration.
I can ping to amiga from my PC and also can access Amiga disks from my PC using Amiga Explorer now!
But, when i installed iBrowse 3, when i try to connect to any site it says it cannot find DNS.
Is something missing regarding network card setting in Roadshow? Can you suggest something?
thanx

UPDATE: i used Roadie to set network ip's etc and now its working fine! thanx!

 

[paolopal]

I'm not expert of amiga net config, but you can do an initial check trying to reach 35.223.124.178 in iBrowse, if working you have to define a dns.
Have a look here: https://www.amigafuture.de/viewtopic.php?t=51351
\Paolo

 

[jcanodk]

@DjCook I'm interested - is the planned batch for March 2024 already sold out?

 

[8 Bit Dreams]

@DjCook I'm interested - is the planned batch for March 2024 already sold out?

No, it wasn't launched yet,
PCBs are ordered and are in production currently, will start to build them in three weeks approximately

 

[jcanodk]

Declaring interest with standard breakout box. Is it possible to buy an extra extended breakout box, so i have one of each?

 

[Ntsimouris]

After almost a month of using it i could say its an amazing card!!!!!
Super stable and works like a charm with my cdrom and many different usb sticks.
Totally recommended piece of hardware!!!!!
I wonder how i didnt buy it earlier!
Thumbs up djcook!

 

[CaptainCoolada]

It's maybe a bit too early, but I'd like to declare preliminary interest for next batch ("March 2024 batch?"), hoping that it will eventually work in combination with the planned CDTV Zorro connector board. If possible, I would appreciate combined shipping with the Terrible Fire-board. Thank you in advance!