Closed 68030 TK - Another accelerator card for Amiga A500/A1000/A2000 designed by Matze (aka Matthias Heinrichs)
- Thread starter 8 Bit Dreams
- Start date
- Replies 441
- Views 96216
- Status
DJcook is still coming on the forum, he's just choosing not to respond to anyone or his sale threads.
Does anyone know how to grab the attention of an admin? These threads should really get closed as it's clear Viktor isn't going to respond. I highly recommend contacting Matze, he might be able to suggest another way of obtaining his accelerators.
Does anyone know how to grab the attention of an admin? These threads should really get closed as it's clear Viktor isn't going to respond. I highly recommend contacting Matze, he might be able to suggest another way of obtaining his accelerators.
Last edited:
Hi guys,
please don't be worried about me, im (and my family members) are fine, just had a lot of things going during last year:
got married in november 2019, my wife and she's daughter moved from other country to Germany right after that - December 2019,
then we moved house, because flat, where i lived previously, was too small for us,
and finally - our son Michael is born one week ago - at 3. October 2020,
so yeah, need to admit, i had too many things i needed to solve before i can sit down and solder some accelerators again...
The good thing is that COVID hasn't any impact on my life, the most important things are solved so far, this means i will continue to solder retro related hardware and relaunch all my threads ive opened here so far..
Stay safe, stay cool!
with best regards from Bavaria,
-8 Bit Dreams
please don't be worried about me, im (and my family members) are fine, just had a lot of things going during last year:
got married in november 2019, my wife and she's daughter moved from other country to Germany right after that - December 2019,
then we moved house, because flat, where i lived previously, was too small for us,
and finally - our son Michael is born one week ago - at 3. October 2020,
so yeah, need to admit, i had too many things i needed to solve before i can sit down and solder some accelerators again...
The good thing is that COVID hasn't any impact on my life, the most important things are solved so far, this means i will continue to solder retro related hardware and relaunch all my threads ive opened here so far..
Stay safe, stay cool!
with best regards from Bavaria,
-8 Bit Dreams
Hi,
I have an A2000 rev 6 and I would be interested in purchasing a 68030 TK accelerator (68030 (not EC030) + 68882 + 64 MB RAM) + relocator for installation on CPU slot.
Please, contact me in pv
Kind Regards
GianDO
I have an A2000 rev 6 and I would be interested in purchasing a 68030 TK accelerator (68030 (not EC030) + 68882 + 64 MB RAM) + relocator for installation on CPU slot.
Please, contact me in pv
Kind Regards
GianDO
Last edited:
gkcooper
New member
Hello All, I have only posted a few times here but I am in need of some help. I have an A1000 and I purchased the 68030TK+4MB SRAM IDE expansion a while back. I just got around to repairing my A1000 motherboard and have now installed the boards. I also installed a ROM relocator and a 3.1 Cloanto ROM. I have an HXC2001 SD floppy emulator and a generic CF-IDE40 adapter. I installed the floppy emulator internally temporarily until I get the system up and running then I will be reinstalling the internal floppy drive. I have an external enclosure for the floppy emulator. I can boot straight into Amiga OS 3.1 Workbench or Install disks but my 64GB CF card is never seen. I realize that only 4GB are usable of this card but it's what I had. What am I missing here? Why does the IDE device not show in the HDSetup or HDTools?
I tried this in an A2000 with an A2091 and although the 2MB RAM worked, there appears to be a conflict between the IDE and SCSI controllers as I couldn't boot from the A2091 at all.. I've currently got it installed ion an A500++ board in a checkmate case witht he A2091 attatched but just using it for the extra RAM.
gkcooper
New member
I am reposting this because I never received any responses:
Hello All, I have only posted a few times here but I am in need of some help. I have an A1000 and I purchased the 68030TK+4MB SRAM IDE expansion a while back. I just got around to repairing my A1000 motherboard and have now installed the boards. I also installed a ROM relocator and a 3.1 Cloanto ROM. I have an HXC2001 SD floppy emulator and a generic CF-IDE40 adapter. I installed the floppy emulator internally temporarily until I get the system up and running then I will be reinstalling the internal floppy drive. I have an external enclosure for the floppy emulator. I can boot straight into Amiga OS 3.1 Workbench or Install disks but my 64GB CF card is never seen. I realize that only 4GB are usable of this card but it's what I had. What am I missing here? Why does the IDE device not show in the HDSetup or HDTools?
Bottom line is that I can boot from my floppy emulator but the machine will not boot if I have the jumper on the IDE adapter to Master/Slave. When it is Slave/Master it boots but never sees the CF card. I am using a 64GB CF card.
Anybody?
Hello All, I have only posted a few times here but I am in need of some help. I have an A1000 and I purchased the 68030TK+4MB SRAM IDE expansion a while back. I just got around to repairing my A1000 motherboard and have now installed the boards. I also installed a ROM relocator and a 3.1 Cloanto ROM. I have an HXC2001 SD floppy emulator and a generic CF-IDE40 adapter. I installed the floppy emulator internally temporarily until I get the system up and running then I will be reinstalling the internal floppy drive. I have an external enclosure for the floppy emulator. I can boot straight into Amiga OS 3.1 Workbench or Install disks but my 64GB CF card is never seen. I realize that only 4GB are usable of this card but it's what I had. What am I missing here? Why does the IDE device not show in the HDSetup or HDTools?
Bottom line is that I can boot from my floppy emulator but the machine will not boot if I have the jumper on the IDE adapter to Master/Slave. When it is Slave/Master it boots but never sees the CF card. I am using a 64GB CF card.
Anybody?
- Status
Similar threads
- Locked
- Locked
