Wanted A1200 and A500 Keyboard membrane

  • Thread starter Thread starter sheepz
  • Start date Start date
  • Replies Replies 6
  • Views Views 813

sheepz

Active member
AmiBayer
Rating - 100%
14   0   0
Joined
Jan 29, 2018
Posts
136
Country
Scotland
Region
Aberdeen
Hi

I am getting rid of my amigas and I have two that need new keyboard membranes for my A500 and 1200 if anyone has some for sale, I am in the UK.

A500 plus - With Mitsumi PCB A500 56 A620A - Motherboard Rev 8A

A1200 - Rev 2B (364951-03 50931206)

Regards

Barry
 
Last edited:
Hi

I am getting rid of my amigas and I have two that need new keyboard membranes for my A500 and 1200 if anyone has some for sale, I am in the UK.

A500 plus - With Mitsumi PCB A500 56 A620A - Motherboard Rev 8A

A1200 - Rev 2B (364951-03 50931206)

Regards

Barry

Do mean something like these?

A1200


A500


Disclaimer: I am NOT the seller of these 👍🏻
 
Hi

Yeah, bought one to try for the A1200, hope its a direct fit, thanks!

Barry
 
Hi

Yeah, bought one to try for the A1200, hope its a direct fit, thanks!

Barry
Hi,

The only things to watch out for are the manufacturer. A lot of keyboards are Mitsumi. You can check this on the Membrane silkscreen. If you have a Samsung or another type, then this gets a little trickier.
 
Hi,

The only things to watch out for are the manufacturer. A lot of keyboards are Matsumi. You can check this on the Membrane silkscreen. If you have a Samsung or another type, then this gets a little trickier.
Thanks, Mine are both Matsumi so fingers crossed.
 
Thanks, Mine are both Matsumi so fingers crossed.
Have bought from these in the past. Worked for me. For reference you can also get a hard type membrane that can be used for both A1200 and A500 keyboards from here:


Have used these also.

I think retro ready one or Amiga haven used to sell these as well in the U.K
 
I have also just bought this keyboard membrane to replace my original keyboard whose 5 different keys didnt work. After replacing the membrane the keyboard didnt work at all yet after a closer look i could see that the far left pin from the keyboard connector on the a1200 was somehow pushed back.I managed to push it against its position to line up with the rest of the pins and voila,presto,the keyboard is fully working for the first time the last 25 years.Thank you hard membrane creators!
 
Back
Top Bottom