For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

  • Thread starter Thread starter mkl
  • Start date Start date
  • Replies Replies 914
  • Views Views 238215
Wow I want one of these. But I have to make two posts here before I can send a PM. :huh:

---------- Post added at 13:54 ---------- Previous post was at 13:52 ----------

I assume these would work on an A1000 if I can get a ROM solution going. What ROM adapter projects are compatible with this board?
 
TheGoose said:
Wow I want one of these. But I have to make two posts here before I can send a PM. :huh:

---------- Post added at 13:54 ---------- Previous post was at 13:52 ----------

I assume these would work on an A1000 if I can get a ROM solution going. What ROM adapter projects are compatible with this board?
Click to expand...

I guess if you get an v40.063 (512KByte) or V37.350 KS-ROM it should work.

EDIT: 37.350 and other KS2.05 and 2.04 are 512 KBytes in size, not 256 KBytes? Also corrected KS3.1 V40.063 to 512 KBytes, not 512MB.
 
Last edited:
@mkl

Hi mate. Good job with these products. Fun & useful :thumbsup:

When you'll have a chance to build again some angled IDE to CF cards adaptor for A600/1200 please count me for 4 of them. Yes: 4. :p

Cheers.
Seb
 
Hi.
I haven't got much idea how these ide boards will fit or even work with accelerator boards. In cases where the dip-64 signals are wired directly from accelerator's bottom pins to top socket, it shouldn't matter if the ide board is placed at the bottom or the top side socket.

About v401 ide: I've exported the cpld pin list from the pcb software and will convert it for the cpld design software. When i'll get the cpld code to process to a jed file, it can be downloaded to the v401 board assembled earlier.

---------- Post added at 16:05 ---------- Previous post was at 15:58 ----------

About v296: i've got one with broken copper tracks replaced with soldered wires now. It needs testing, and then fixing the thin wires in place with epoxy (or hot) glue.
There's an uncounted number of old incompleted v295 and v296 boards.

Angled cf adapter: parts for 20 boards, and some older boards that are not yet necessarily working.
 
Hello!
Im not sure if you still sell the angled IDE to CF adaptor. But im interested in one.
sending a PM to check:)

Geir Ove
 
Feedback left Rakeim and gounderset. I'll also try to leave the feedbacks which I haven't yet later.
 
Converted cpld code for v401 and it appears to work (boots from a cf-card in adapter at the end of 40-pin cable).
 
Seaside said:
mkl said:
Converted cpld code for v401 and it appears to work (boots from a cf-card in adapter at the end of 40-pin cable).
Click to expand...

So when they will be ready ?
Click to expand...

I'll be home on monday and i'll be making some adapters a couple of days next week, and probably away by the end of week.
I'll take prepayments.
Price for one pce: 40 euros, registered mail 7 euros. I've also got one completed angled ide to cf adapter (20 euros) and to ps/2 mouse adapters (10 euros/1pce)

Please tell what kind of 40-pin connector you want: right-angle or straight, "boxed"("walled") or "plain" pin header. NOTE: The 40-pin connector is very close to the CPU, so though a straight ide connector can be placed on the pcb, the space is limited so that a 68000 CPU can be placed on the board, but nothing wider, such as 'riser' socket or some other adapter or memory board, but with a right angle connector such things might fit.

I'm going to place /int2, /ovr and led signals on the pads at the end of the board (marked SPARE_IO)
 

Attachments

  • 25042011184-001.jpg
    25042011184-001.jpg
    108.6 KB · Views: 4
Last edited:
OK. Count me in for 1 please. Like the one in the photo.

The jumper next to the IDE is used for what ?

The wiring will be like the v296 version ? Wires will go the zorro expansion ?
 
Feedback left for Cluster.

---------- Post added at 19:53 ---------- Previous post was at 19:50 ----------
Seaside said:
The jumper next to the IDE is used for what ?


The wiring will be like the v296 version ? Wires will go the zorro expansion ?
Click to expand...

The 2-pin header next to IDE has the /ovr and /int2 signals. These will signals be duplicated on other cpld pins, and pads on pcb.
The signals can be connected to pads on mainboard next to the 86-pin edge connector, but they can be found on other places which may vary by version of A500 mainboard.
http://www.iki.fi/mkl/i68k.html

---------- Post added at 19:54 ---------- Previous post was at 19:53 ----------

I've been busy, no v401 assembled yet.

---------- Post added at 19:56 ---------- Previous post was at 19:54 ----------

Next to 2-pin header there's an smd led.
When led output signal is "duplicated" on other cpld pins it will be without a series resistor, which is therefore needed externally.

---------- Post added at 19:56 ---------- Previous post was at 19:56 ----------

Note: the top metal shield of A500 may not fit back in when using these ide adapters.
 
Of course shield is history.

Let me know please either here or with PM when you can send me a 401.

Thanks.
 
You must log in or register to reply here.

Similar threads

R
For Sale Amiga USB PS/2 Mouse Adapter - for all Commodore Amiga models (incl. A600)
Replies
10
Views
286
Roman
R
Back
Top Bottom