Announcement

Collapse
No announcement yet.

Final Cartridge III+ PCB / Kit Pre-Order

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Final Cartridge III+ PCB / Kit Pre-Order

    Hi everyone!

    I'm going to do a PCB run of the Final Cartridge III+ design created by e5frog. The PCBs will be $5.50 each ($5 each if using PayPal Gift) and Full Kits will be $21.00 each ($20 each if using PayPal Gift) + shipping.

    If I get pre-orders for at least 20 PCBs then the PCBs will be done with a red solder mask, otherwise they will be green. *UPDATE* Plenty of orders for the red PCBs.

    Please let me know if you are interested in a full kit or just the PCB. The cost of full kits will ultimately depend on how many people want kits. I'm not doing this for profit, but I really don't want to lose money on it either.

    Thanks!

    Heather

    *UPDATE* The cost for anyone expressing interest in a kit after 11/7/14 needs to add an additional $1 to the price of the kit. I ran out of EEPROMs from my initial order and this increase in cost is to cover the higher price of the chip since I need to buy in a smaller quantity. This increase does not affect anyone who had previously ordered a kit.

    PCB prices have not changed.


    User PCB Kit Paid Shipped Ship To
    Bryce 0 1 Yes Delivered
    jkonstan 1 0 Yes Delivered
    fatbob_gb 2 0 Yes Delivered
    SAM55 4 0 Yes Delivered
    TjLaZer 0 1 Yes Delivered
    ChrisUnionNJ 0 2 Yes Delivered
    Allen1 0 2 Yes Delivered
    Cryton 0 1 Yes Delivered
    DutchinUSA 0 2 Yes Delivered
    scoobyatgb 0 2 Yes Delivered
    *MoreBITS 0 2 Yes Delivered
    Gatecrasher 0 1 Yes Delivered
    rainbowat 0 1 Yes Delivered
    1200Danny 0 1 Yes Delivered
    merlin1968 0 1 Yes Delivered
    TheCorfiot 0 2 Yes Delivered
    iainjh 0 1 Yes Delivered TheCorfiot
    Sardine 0 1 Yes Delivered TheCorfiot
    sir_beaker 0 1 Yes Delivered TheCorfiot
    voyager_1701e 0 1 Yes Delivered
    demolition 0 1 Yes Delivered
    ajk 0 1 Yes Delivered
    Clyd3 0 1 Yes Delivered
    HiMark 0 1 Yes Delivered
    finnr 0 1 Yes Delivered
    Hellraiser 0 1 Yes Delivered
    byeni 0 1 Yes Delivered
    Azryl 0 1 Yes Delivered
    ulkealan 0 1 Yes Delivered
    uunek 0 2 Yes Delivered
    tihopop 0 1 Yes Delivered
    botialoach 0 1 Yes Delivered
    ruireispt 0 1 Yes Delivered
    storhemulen 0 1 Yes Delivered
    corigon 1 1 Yes Delivered
    Merlin 0 1 Yes Delivered
    Pluto63 0 1 Yes Delivered
    sweetlilmre 0 1 Yes Deliviered
    Labels - The grey background labels are actually transparent and will print in white:









    Original editable file created with Inkscape (Backgrounds are in different layers) plus all separate PNG images:
    http://www.hookturn.com/files/Final%...s%20Labels.zip
    *LTC Glamour Bold Font is needed to edit.*
    Last edited by SkydivinGirl; 19 May 2017, 12:48.
    Promoted to Level II Solder Tech and Hackery Padawan

  • #2
    HI Heather,
    I would be interested in a full kit. Put me down for 1!
    thanks
    Ash
    A1200 ACA1221 & 1221lc, A600 ACA620/Vampire II Black, A500,A500+ & A500++ ACA500+ Vampire II, A2000 Re-created with TF534, VIC20 / C16 / C64 / C64 Reloaded
    I'm a memory collector. I collect stuff that elicit good memories from my past - nostalgia

    Comment


    • #3
      Hi Heather,

      this sounds like a great idea, could you mention what parts are needed to build this with just the circuit board or what will be in the kit as parts and will there be a blank eprom with the bin file or a programmed eprom etc. I haven't done any research for this as I only just read your thread today so please forgive the rough way i've asked about it.

      I know that these come up now and then and are very popular so these new ones should go pretty fast, you can put me down for 2 PCBs which I may change to kit once I find what is needed (now changed to 2 full kits instead of just PCBs)

      Cheers,
      Allen
      Last edited by Allen1; 1 November 2014, 16:21. Reason: Changed from PCBs to full kit on message #13

      Comment


      • #4
        I'm interested in one full kit please

        Comment


        • #5
          I will be interested in a couple of PCBs please Heather.

          Comment


          • #6
            I would be interest one and put me down please
            http://www.flashtro.com/
            http://www.retro-remakes.net/
            http://www.ultimateamiga.co.uk

            Comment


            • #7
              Heather, 2 PCB's please .. turn into 2 kits if you decide to go that route

              Comment


              • #8
                Wow! Great responses so far.

                Here's the part list from the PCB file:

                C1 1nF C050-024X044 rcl (50.8 59.055) R0
                C2 10µF E1,6-4 POLCAP (39.0525 75.565) R90
                C3 1µF E1,6-4 POLCAP (21.59 75.565) R90
                D1 BAT48 DO07 DIODE (30.1625 65.0875) R90
                D2 BAT48 DO07 DIODE (33.3375 65.0875) R90
                D3 BAT48 DO07 DIODE (6.0325 20.32) R270
                D4 BAT48 DO07 DIODE (8.89 20.32) R270
                D5 BAT48 DO07 DIODE (11.43 20.32) R270
                D6 LED LED3E LED (44.1325 75.8825) R0
                FREEZE B3F-31XX switch-omron (7.5 75) R180
                IC1 74273 DIL20 74XX (41.91 51.435) R0
                IC2 74163 DIL16 74XX (13.97 66.675) R0
                IC3 74133 DIL16 74XX (43.18 34.925) R0
                IC4 7404 DIL14 74XX (45.72 66.675) R0
                IC5 LS09 DIL14 74XX (12.7 51.435) R0
                JP1 JP2 jumper (19.3675 32.7025) R0
                R1 1K2 0207/10 rcl (26.3525 65.405) R90
                R2 18k 0207/10 rcl (25.0825 51.7525) R90
                R3 3k3 0207/10 rcl (10.16 59.055) R180
                R4 3k3 0207/10 rcl (29.845 75.565) R0
                RESET B3F-31XX switch-omron (50.92 75) R180
                U$1 27C020 DIL32 MEMORY (34.29 20.32) R0
                U$2 C64_EXPANSION EDGE44_254 000_e5frog (56.8325 -4.445) R180

                If doing a kit, I can help with EEPROM programming if you need it.

                Heather
                Promoted to Level II Solder Tech and Hackery Padawan

                Comment


                • #9
                  Originally posted by Allen1 View Post
                  this sounds like a great idea, could you mention what parts are needed to build this with just the circuit board or what will be in the kit as parts and will there be a blank eprom with the bin file or a programmed eprom etc. I haven't done any research for this as I only just read your thread today so please forgive the rough way i've asked about it.
                  I realized I didn't answer your question. With the kits, I will provide the EPROMs and can program them if you don't have a programmer. I'll also provide a link to the file.

                  I forgot to mention in my first post that this is using an updated ROM version that's not in the original FC-III cartridges. I'll pull together a list of what's new in a bit.

                  Here's a look at the PCB in red.



                  Thanks everyone!

                  Heather
                  Promoted to Level II Solder Tech and Hackery Padawan

                  Comment


                  • #10
                    Interested in a kit!

                    Comment


                    • #11
                      1 kit for me please Heather
                      Ritchie Blackmore's Rainbow June 2016, I Was There

                      Comment


                      • #12
                        Heather, count me in for four PCB's please.

                        Best regards, SAM

                        Comment


                        • #13
                          Cheers Heather,

                          could you make that 2 full kits instead of just the PCBs please, it will save me hunting for the parts when i get round to building them

                          I have a programmer so the updated bin file would be much appreciated

                          Thanks,
                          Allen

                          Comment


                          • #14
                            I'll take 2 kits pending final price and with eprom programing
                            thanks Heather..
                            Never Bin or sell your old computer's you will regret it!!
                            Vic 20 x3,C64 x2,128D,C128 flat deck,A1000 x2,A500 x3,A2000,A600,A1200,Apple ][e,2x Apple][ GS rom 01,03,Apple ][c x4 with only 1 PSU,2x Laser 128EX EX2,Atari 600XL,2x 800XL,130XE w/320 mod With a MyIDE plus,Atari 1040stf w/2.5meg..

                            Comment


                            • #15
                              Also interested on a kit if it can be shipped to TC and he has time. Go nice with my SD2IEC C64
                              Consoles: WonderMega|FM Towns Marty II|PS3|PS2|PS1|DC|Saturn|MD|MCD|SMS1|SMS2|SG1000 II|Wii|GC|N64|Snes|NES|PCE|360|Xbox|GX4000| HH: 3DS|AGS-101|AGS-001|GBA|GB Micro|GG|PSP|NeoGeo Pocket Colour|PocketStation| Computers: A1200 + 8GB + 1230 + 32MB|A1200 + 4GB + 8MB|C64G|C64C|ST|800XE|6128+|6128|664|464|Einstein|ZX81|Spectrum +2|Electron|Model B|Master 128|

                              Comment

                              Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
                              Working...
                              X