Final Cartridge III+ PCB / Kit Pre-Order

[SkydivinGirl]

Hi everyone!

I'm going to do a PCB run of the Final Cartridge III+ design created by e5frog. The PCBs will be $5.50 each ($5 each if using PayPal Gift) and Full Kits will be $21.00 each ($20 each if using PayPal Gift) + shipping.

If I get pre-orders for at least 20 PCBs then the PCBs will be done with a red solder mask, otherwise they will be green. *UPDATE* Plenty of orders for the red PCBs.

Please let me know if you are interested in a full kit or just the PCB. The cost of full kits will ultimately depend on how many people want kits. I'm not doing this for profit, but I really don't want to lose money on it either.

Thanks!

Heather

*UPDATE* The cost for anyone expressing interest in a kit after 11/7/14 needs to add an additional $1 to the price of the kit. I ran out of EEPROMs from my initial order and this increase in cost is to cover the higher price of the chip since I need to buy in a smaller quantity. This increase does not affect anyone who had previously ordered a kit.

PCB prices have not changed.

[TABLE="width: 328"]
[TR]
[TD]User[/TD]
[TD]PCB[/TD]
[TD]Kit[/TD]
[TD]Paid[/TD]
[TD]Shipped[/TD]
[TD]Ship To[/TD]
[/TR]
[TR]
[TD]Bryce[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]jkonstan[/TD]
[TD]1[/TD]
[TD]0[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]fatbob_gb[/TD]
[TD]2[/TD]
[TD]0[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]SAM55[/TD]
[TD]4[/TD]
[TD]0[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]TjLaZer[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]ChrisUnionNJ[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Allen1[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Cryton[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]DutchinUSA[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]scoobyatgb[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]*MoreBITS[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Gatecrasher[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]rainbowat[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]1200Danny[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]merlin1968[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]TheCorfiot[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]iainjh[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD]Delivered[/TD]
[TD]TheCorfiot[/TD]
[/TR]
[TR]
[TD]Sardine[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD]Delivered[/TD]
[TD]TheCorfiot[/TD]
[/TR]
[TR]
[TD]sir_beaker[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD]Delivered[/TD]
[TD]TheCorfiot[/TD]
[/TR]
[TR]
[TD]voyager_1701e[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]demolition[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]ajk[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Clyd3[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]HiMark[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]finnr[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Hellraiser[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]byeni[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Azryl[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]ulkealan[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]uunek[/TD]
[TD]0[/TD]
[TD]2[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]tihopop[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]botialoach[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]ruireispt[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]storhemulen[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]corigon[/TD]
[TD]1[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Merlin[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]Pluto63[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD="colspan: 2"]Delivered[/TD]
[/TR]
[TR]
[TD]sweetlilmre
[/TD]
[TD]0[/TD]
[TD]1[/TD]
[TD]Yes[/TD]
[TD]Deliviered[/TD]
[TD] [/TD]
[/TR]
[/TABLE]

Labels - The grey background labels are actually transparent and will print in white:









Original editable file created with Inkscape (Backgrounds are in different layers) plus all separate PNG images:
http://www.hookturn.com/files/Final Cartridge III Plus Labels.zip
*LTC Glamour Bold Font is needed to edit.*

 

[voyager_1701e]

HI Heather,
I would be interested in a full kit. Put me down for 1!
thanks

 

[Allen1]

Hi Heather,

this sounds like a great idea, could you mention what parts are needed to build this with just the circuit board or what will be in the kit as parts and will there be a blank eprom with the bin file or a programmed eprom etc. I haven't done any research for this as I only just read your thread today so please forgive the rough way i've asked about it.

I know that these come up now and then and are very popular so these new ones should go pretty fast, you can put me down for 2 PCBs which I may change to kit once I find what is needed (now changed to 2 full kits instead of just PCBs)

Cheers,
Allen

 

[rainbowat]

I'm interested in one full kit please

 

[fatbob_gb]

I will be interested in a couple of PCBs please Heather.

 

[Amiga Forever]

I would be interest one and put me down please

 

[DutchinUSA]

Heather, 2 PCB's please .. turn into 2 kits if you decide to go that route

 

[SkydivinGirl]

Wow! Great responses so far.

Here's the part list from the PCB file:

C1 1nF C050-024X044 rcl (50.8 59.055) R0
C2 10µF E1,6-4 POLCAP (39.0525 75.565) R90
C3 1µF E1,6-4 POLCAP (21.59 75.565) R90
D1 BAT48 DO07 DIODE (30.1625 65.0875) R90
D2 BAT48 DO07 DIODE (33.3375 65.0875) R90
D3 BAT48 DO07 DIODE (6.0325 20.32) R270
D4 BAT48 DO07 DIODE (8.89 20.32) R270
D5 BAT48 DO07 DIODE (11.43 20.32) R270
D6 LED LED3E LED (44.1325 75.8825) R0
FREEZE B3F-31XX switch-omron (7.5 75) R180
IC1 74273 DIL20 74XX (41.91 51.435) R0
IC2 74163 DIL16 74XX (13.97 66.675) R0
IC3 74133 DIL16 74XX (43.18 34.925) R0
IC4 7404 DIL14 74XX (45.72 66.675) R0
IC5 LS09 DIL14 74XX (12.7 51.435) R0
JP1 JP2 jumper (19.3675 32.7025) R0
R1 1K2 0207/10 rcl (26.3525 65.405) R90
R2 18k 0207/10 rcl (25.0825 51.7525) R90
R3 3k3 0207/10 rcl (10.16 59.055) R180
R4 3k3 0207/10 rcl (29.845 75.565) R0
RESET B3F-31XX switch-omron (50.92 75) R180
U$1 27C020 DIL32 MEMORY (34.29 20.32) R0
U$2 C64_EXPANSION EDGE44_254 000_e5frog (56.8325 -4.445) R180

If doing a kit, I can help with EEPROM programming if you need it.

Heather

 

[SkydivinGirl]

this sounds like a great idea, could you mention what parts are needed to build this with just the circuit board or what will be in the kit as parts and will there be a blank eprom with the bin file or a programmed eprom etc. I haven't done any research for this as I only just read your thread today so please forgive the rough way i've asked about it.

I realized I didn't answer your question. With the kits, I will provide the EPROMs and can program them if you don't have a programmer. I'll also provide a link to the file.

I forgot to mention in my first post that this is using an updated ROM version that's not in the original FC-III cartridges. I'll pull together a list of what's new in a bit.

Here's a look at the PCB in red.



Thanks everyone!

Heather

 

[storhemulen]

Interested in a kit!

 

[TheCorfiot]

1 kit for me please Heather

 

[SAM55]

Heather, count me in for four PCB's please.

Best regards, SAM

 

[Allen1]

Cheers Heather,

could you make that 2 full kits instead of just the PCBs please, it will save me hunting for the parts when i get round to building them

I have a programmer so the updated bin file would be much appreciated

Thanks,
Allen

 

[ChrisUnionNJ]

I'll take 2 kits pending final price and with eprom programing
thanks Heather..

 

[sir_beaker]

Also interested on a kit if it can be shipped to TC and he has time. Go nice with my SD2IEC C64

 

[SkydivinGirl]

Wow! That's pushed us over the 20 board goal so it will be red PCBs! I'll start pricing parts tomorrow for the kits and hopefully have a price for everyone.

Heather

 

[Merlin]

One kit here please, Heather.

 

[TheCorfiot]

Actually make it 2 kits for me and pls send sir_beakers kit direct to me as well

Cheers Hon

 

[uunek]

I'm interested in two full kits please.

 

[scoobyatgb]

I'll take 2 kits pending final price and with eprom programing
thanks Heather..