For Sale Useful Amiga Cables & Adapters

[a.mi.goun]

Payment received from Gouky and jd64. Shipping items on tuesday.

 

[Rakeim132]

Interested in 2x A600 mouse/joystick cable extension. Would love them to be 10cm long maxi... and white as the picture.
Thanks


Sent from my iPhone using Tapatalk

 

[Rakeim132]

Added A600 mouse/joystick port cable adapter to the list of the offered adapters.
- This special home-made 9pin Dsub (canon) cable extender allows connecting devices to Amiga 600 mouse/joystick that normally would not fit. You can connect all my adapters to A600 thanks to this modified cable. The connection is 1:1, all 9 signal lines connected, so you can use this adapter cable with other computers/consoles as well if needed.

... this one.


Sent from my iPhone using Tapatalk

 

[a.mi.goun]

Payment received from Rakeim132, shipping cables asap.

 

[a.mi.goun]

Items for Gouky and jd64 sent today.

 

[a.mi.goun]

Cables for Rakeim132 sent today.

 

[Gouky]

received! positive feedback left!

 

[jd64]

Cable received. Feedback left.

 

[cyberfred91]

Hi A.mi.goun

Do you have a cable for doing this : Having a DF0-DF1 boot selector, for connect a gotek and a real floppy drive in internal of an a500 ?

I want to integrate my gotek and my real floppy on my a500 A boot with df0 or df1

May be i must change

Thanks

 

[a.mi.goun]

Yes I sell those bootselectors in the Gotek round cables thread. I can add them to the list here too.

 

[cyberfred91]

Ok, i found your thread.

I need an internal cable for DF0 floppy and DF1 gotek (no external).
And a switch to change DF0 to DF1 ans DF1 to DF0

Do you have one ?

 

[a.mi.goun]

Great.
From what I know, it is impossible to have two floppy drives on internal cable on A500 without additional logic, that is present in bigbox amigas. But not quite sure about floppy and gotek, I remember I saw a thread here someone having something like that, but if only I am able to find it again

- - - Updated - - -

Did some tests. And interestingly it works At least on my A600. DF0-1 switching would possibly require routing some signal from external port.

 

[a.mi.goun]

Added 1438 RGB monitor - VGA adapter.
Allows connecting Amiga (Microvitec) multisync monitors (with 23pin RGB cable) to VGA port (15pin) such as graphics card on Amiga or PC.

 

[a.mi.goun]

Added A500 bootselector from my other thread here to the list.

 

[a.mi.goun]

Added Amiga 2000 - ATX Power Supply Adapter.
With this adapter you can connect standard PC ATX Power supply to Amiga 2000 and thus replace the old, noisy and failing original PSU.

 

[a.mi.goun]

Joystick UP & Fire Swap adapter from my other thread added to the list of offered adapters.
- With this small adapter you can connect your joystick and it will swap the 'UP' & 'FIRE' buttons, so that you can press fire button for jump and the fire is routed to second fire button. Many people me including like to press fire for jump in jumpy games like James Pond 2 Robocod any many more games but these games are coded for only UP direction for Jump. Only way is to swap the signal lines and that is what the adapter does. You can decide whether you want swap: UP for Fire1, or UP for Fire2. The other Fire button will be mapped for fire. You need 2 fire button joystick to have both fire and up. You can also decide if you want UP button disconnected or connected both 'UP' and 'second fire button' for jump.

 

[anttia]

interested in mist-1084 cable
PM sent

- - - Updated - - -

payment done

 

[a.mi.goun]

Payment received from anttia, shipping cable tommorow.

 

[a.mi.goun]

MiST-1084 Cable for anttia sent today.

 

[NoPyroNoParty]

Does the Replacement cable for DCE internal Scandoubler/Flickerfixer output end fit in place of the rf-modulator?