For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

[mkl]

Actually seems like "rfsh_cas" register was needlessy asynchronously cleared in a bad time in the middle of refreshing, from cpu /as pin low.
At least removing this line seems to fix the bug so that mc68hc000 cpu works with the ram.

 

[gnasher666]

Interested in IDE no ram for CDTV (assuming my existing diag port 8mb ram upgrade will still function)

 

[TheMightyMadman]

I'd be interested in an IDE board, no RAM, and one of your CF-IDE boards (with trimmed upper pins) for an A500+ please! Shipping to UK.

 

[mkl]

This one assembled, insulator to cf adapter top will be added.

- - - Updated - - -


A unit with broken track fixed with wire, 70€.

edit: wire superglued. Will wrap tape a few rounds around the pcbs to protect. After scratching off any superglue on ram config in out pads in case they will be ever used .
Jtag header not to fit under a500 kbd, A1k,2k cdtv should fit.

 

[habib]

Interested in this unit with fixed track. Is it actual?

 

[Clonecds]

intested in a cf for the 500

intested in a cf for the 500

interested in an IDE board, but iam learning the system

 

[dave5678]

Interested in an IDE board for A500 standard. Thank you!

 

[Esmun]

Interested in the soldered combination 8MB+IDE for A500

Interested in the soldered combination 8MB+IDE for A500

Hi, I'm interested in the soldered combination 8MB+IDE for my A500 rev. 6a, thank you.

 

[TheNey]

UPDATE: Tried a different CF adapter and now both RAM and IDE work like a charm.

Great work mkl, thank you!

 

[mkl]

UPDATE: Tried a different CF adapter and now both RAM and IDE work like a charm.

Great work mkl, thank you!

Some ideboards supply +5v and some +3.3v to pin 20 of ide header.

Some female connector cf-ide adapters seem have diodes in power lines, maybe preventing +5v floppy connector supply going to pin 20 of ide/ vice versa. Diode may drop +3.3v from pin 20 too low and connecting +5v powers the cf card to 5v-diode drop voltage?

 

[TheNey]

Yes, I had to power the CF adapter with the floppy connector (adapter only had a 39-pin IDE connector), so I guess I'm using an external floppy drive unless I can piggy-back the power (not that I really need a floppy now that I have a HDD).

Anyway, great to have everything working, this a a great board and cheapest way I know to get an A500 WHD-load capable.

 

[NuClear235]

3x 8MB+IDE

3x 8MB+IDE

Hi, I'm interested in
-3x the soldered combination 8MB+IDE for my A500 rev. 6a,
thank you.

 

[Moksud.com]

HI, i'm interested in the IDE (no ram) for CDTV.
Thanks

 

[Moksud.com]

Interest withdrawn as I have decided to use SCSI for CDTV as I need OS1.3 to boot.
Thanks

 

[voyager_1701e]

Interested in 2 x A500 8MB+ide(80€)....will PM

 

[mdanh2002]

Interested. Will PM.

 

[GMBigB]

I am interested in twoA600 cf adapters. Sending PM.

 

[mdanh2002]

Interested. Will PM.

Payment made for IDE + IDE RAM card + 68k CPU

 

[SukkoPera]

Interested in a RAM-only board, please PM total cost with shipping to Italy.

 

[SukkoPera]

PM received and payment sent.