Stunning project, very well done!! 
Amiga A1200 Tower Project.
- Thread starter Ed.D
- Start date
- Replies 115
- Views 144407
droozy74
New member
Best tower i have ever seen. Brilliant!
Ed.D
Active member
Hi guys,
Just saw ramparts request for PCI measurements. Will do as soon as I can, doing some major DIY at the mo', so haven't been online much.
Just one point though, my PCI slots came from an old PC tower so may be different to what you have ramparts. I'll add the measurements, but they might not be of any use to you.
Cheers
Just saw ramparts request for PCI measurements. Will do as soon as I can, doing some major DIY at the mo', so haven't been online much.
Just one point though, my PCI slots came from an old PC tower so may be different to what you have ramparts. I'll add the measurements, but they might not be of any use to you.
Cheers
Ed.D
Active member
Added dimensions for PCI cutout to file list.
Added dimensions for PCI cutout to file list.
Just added a new JPG drawing to page 1 with dimensions for the PCI cutout. Second jpg link down, CaseRearPanel2.jpg. Please let me know if you need anything else added.
Page 1: https://www.amibay.com/showthread.php?p=103495#post103495
Cheers,
Ed.
Added dimensions for PCI cutout to file list.
Just added a new JPG drawing to page 1 with dimensions for the PCI cutout. Second jpg link down, CaseRearPanel2.jpg. Please let me know if you need anything else added.
Page 1: https://www.amibay.com/showthread.php?p=103495#post103495
Cheers,
Ed.
Ed.D
Active member
What version to read the Autocad file ?
I sent to a freind who uses everyday and he couldn't open this one...
Hi Rakeim, I'm afraid I do not know, sorry
. It was an export from Corel Draw X3. However I am trying out the new version of CorelDraw X6 and there appears to be several DXF export versions. Can you let me know which one would you need and I'll try to create a new export.Versions available; R2.5, R2.6, R9.0, R10, R11, R13, R14, 2000, 2004, 2005, 2006, 2007, 2008.
Ed.D
Active member
Hi Ramparts,
I was pretty careful in checking the connections but I am only human
, mistakes could be made for sure. I think it's ok though because it works.
Are you doing something similar and having problems?
Cheers,
Ed.
I was pretty careful in checking the connections but I am only human
, mistakes could be made for sure. I think it's ok though because it works. Are you doing something similar and having problems?
Cheers,
Ed.
Yes i am doing my tower project that unfortunatly some work have put me off line ,
http://eab.abime.net/showthread.php?t=64474
also i am developing some hardware like this and according to the schematics it should be on pin 38 ,maybe some time when you have to put something in your tower you can confirm this issue .
A friend of mine liked the simbol on your tower and i reproduced him on a pc tower ,he is all happy ,and he says when finish his project he will post on the web so maybe soon i will sent you some pictures of it
your work was indeed very good that is the result when man and will are on top.
Best wishes JOSÉ
http://eab.abime.net/showthread.php?t=64474
also i am developing some hardware like this and according to the schematics it should be on pin 38 ,maybe some time when you have to put something in your tower you can confirm this issue .
A friend of mine liked the simbol on your tower and i reproduced him on a pc tower ,he is all happy ,and he says when finish his project he will post on the web so maybe soon i will sent you some pictures of it
your work was indeed very good that is the result when man and will are on top.
Best wishes JOSÉ
Ed.D
Active member
Hi JOSÉ,
You are correct my friend, I have connected the green wire to the wrong pin. I believe this is because I removed the end pin next to the crack in the socket and then counted two pins from that end when I soldered the wire on, of course it should have been three pins from the end.
Well spotted. ...and I'm sorry for any confusion.
I'm not sure if this post will work, Amibay and IE-10 seem to be playing up today.
Kind regards,
Ed.
You are correct my friend, I have connected the green wire to the wrong pin. I believe this is because I removed the end pin next to the crack in the socket and then counted two pins from that end when I soldered the wire on, of course it should have been three pins from the end.
Well spotted.
...and I'm sorry for any confusion.I'm not sure if this post will work, Amibay and IE-10 seem to be playing up today.
Kind regards,
Ed.
I have a sharp eye 
i am glad to help any one who are interested in towering the amiga.
your tower is great i must confess i was planing in the beggining to buy one like yours but the shipping and the budget framed me
Best Wishes Ed
i am glad to help any one who are interested in towering the amiga.
your tower is great
i must confess i was planing in the beggining to buy one like yours but the shipping and the budget framed me Best Wishes Ed
CodEx
New member
Very nice work. It has inspired me in my next A1200 improvement.
Thanks for your posts!
Thanks for your posts!
Hi Ed. Hope this request will find you well.
I'd love to have the dimensions for the PSU and the fan... I believe the fan dimensions will be very easy to find by myself, but what is the form factor you used for the PSU ? I looks small but great inside...
Last edited:
Similar threads
- Locked
