Fitzsteve's A1200 Tower Project =)

  • Thread starter Thread starter fitzsteve
  • Start date Start date
  • Replies Replies 120
  • Views Views 25419
I was just about to ask exactly the same thing. :)
 
One more pic for you guys =)

One more pic for you guys =)

IMG_8059.jpg
 
Sound cards in :ninja:

Now I just need to work out how to use it!

IMG_8076.jpg


IMG_8078.jpg
 
@ fitzsteve

Have you considered running the IDE CF reader from the back plane to a Front port?

KIn
 
@ fitzsteve

Have you considered running the IDE CF reader from the back pane to a Front port?

KIn

Hoping to use a USB card reader once I get USB sorted out, for now its ok there at the back, the Tower is in a position where its easy to access the back and swap the card. Its only for transfer of files as its on the 2nd IDE port & can run without the CF card in place :)

Steve.
 
@ fitzsteve

Have you considered running the IDE CF reader from the back pane to a Front port?

KIn

Hoping to use a USB card reader once I get USB sorted out, for now its ok there at the back, the Tower is in a position where its easy to access the back and swap the card. Its only for transfer of files as its on the 2nd IDE port & can run without the CF card in place :)

Steve.

Then consider a SubWay card as I fitted to ravestar's rig in the photo booth. You could than lash a nice USB card reader offering you more than just CF. ;)

Kin
 
Thanks for the suggestion Kin, very much open on the direction now :D

Just trying to set up the Sound, after installing drivers and booting I get a pop up box to say that it can't load the mixer.

Guess there's something I have to setup, I'd better... :coffee:

lol

Steve.
 
The mixer program is broken out of the box.

I need to remember how to fix it as I never hooked a sound card in my MediTator.

BTW: why you don't have a Realtek 8139 hooked in? It is a lot faster than any PCMCIA card you can hook in the Amiga PCMCIA port.
 
Last edited:
/....pimp mode on....

I've got an 8139 & a couple of 8029's here if you want better Ethernet Steve. :thumbsup:

/....pimp mode off....

Charlie
 
/....pimp mode on....

I've got an 8139 & a couple of 8029's here if you want better Ethernet Steve. :thumbsup:

/....pimp mode off....

Charlie

Sounds good mate, don't mind which one as long as it works on the mediator, if you drop me a PM with the amount you want + P&P (Kent) we can go from there, oh will be paying by Paypal Giftage :thumbsup:

Steve.
 
What TCP/IP stack are you using m8?

Charlie

Hi mate using MiamiDX :)
Mozilla/5.0 (SymbianOS/9.2; U; Series60/3.1 NokiaN95/21.0.016; Profile/MIDP-2.0 Configuration/CLDC-1.1 ) AppleWebKit/413 (KHTML, like Gecko) Safari/413
 
Back
Top Bottom